After clocking over 5,000km on my Vitus Nucleus hardtail, I decided it was time to treat it to some upgrades. The original Suntour fork was a weak point in the spec, and was past its best. So when I spotted a great deal on the same Fox 34 fork as I have fitted to my Orange Four I had to buy them. They weren’t a straight swap onto the bike, meaning I had to replace the front wheel. I had planned to upgrade the wheels on my Four, then fit the old front wheel onto the hardtail. However, I spotted a stupidly cheap front wheel online, so ordered that. Although it meant I didn’t get the nice new wheels on my main bike, the total cost was a fraction of what I would have spent. I already knew the new forks would be good, due to my experience with them on the Four, but what I hadn’t expected was how much lighter they are than my old forks. I tried to pop a manual (rolling along on the back wheel only) and the front end came up so easily that I almost went over the back of the bike.
You may be wondering why a new fork and front wheel are v1.2 and what happened to v1.1… Shortly after getting back from honeymoon, and three quarters of the way through my 2,015km in 2015, the original low end 3×9 drivetrain was pretty worn out. As it was clear that mountain biking wasn’t just a passing phase I decided to upgrade to an XT 1×10 set up – not quite top of the range, but still high end. At the same time, fed up with repeated punctures, I fitted the “Protection” version of the Continental X King tyres and set them up tubeless. These upgrades cost roughly the same amount as the whole bike had the previous year, however they totally transformed it. The drivetrain was significantly smoother, the bike lighter and crucially, more reliable. I had three years with the bike in this v1.1 configuration. Riding it on local trails, at trail centres, pumptracks, training rides and the odd commute, the bike felt much better that the sum of its parts.
Since fitting the new fork I had done a few local shakedown rides, but with my Four out of action, after I smashed the rear mech on a log last week, I used the hardtail for my big Sunday ride. I decided to do my Kenilworth loop, a mixture of single track and bike paths, to Kenilworth and back. Before I stopped working on Fridays, this was my regular extended commute. I hadn’t ridden it for a while, so thought it would be a good test of the new fork. Even just rolling down the lane behind the garage the bike felt amazing, it seemed to carry speed better than the full suspension bike. I expect this is down to the faster rolling tyres, but the lack of suspension won’t have hurt. Normally on this route I ride straight through the middle of Park Wood, but this time I decided to add in a full loop, to test the bike on the downhill sections. It felt good, really good. Checking Strava when I got home, I’d got my second best time ever! When I got to Kenilworth I did a lap of my old Friday interval session – up Coventry Road, down the Common bridleway and back up the Greenway, taking it easy on the flat bits in between. I shocked myself by how easily I got up the hill on Coventry Road. I still remember struggling up it a few years ago, but now I was even able to climb it fairly quickly and I don’t think that was to do with the bike!
I was really enjoying riding the hardtail, until I got to a bit of trail, that I’ve only ever ridden on my Orange. It isn’t a frequently used section of trail, and was quite bumpy – not something I’d ever noticed on my full suspension bike. I don’t know if I was tired, after pushing on earlier in the ride, or if it was the bumpy trail, but I just couldn’t get any flow. In contrast to the rest of the ride I felt so slow. I see this as a challenge for next time I ride that trail on the hardtail. Later in the ride, I managed to equal my personal record on the “Milk Bar Trail”, a fun little trail in Earlsdon that I’ve ridden almost 100 times according to Strava. I wasn’t sure if I should be pleased with my time, especially as the trail has got harder since setting my best time, or if I should be annoyed that I set the time on my old hardtail, rather than my “good bike”.
Whilst I really enjoyed my ride on the hardtail, there are still a few bits that I need to sort out:
- Brakes – The original Tektro brakes aren’t great. It could be that they need a good service, but they are much harder to work on than the Shimano brakes on my Four. I expect that when I see a good deal on some Shimano brakes I’ll upgrade.
- Lack of dropper post – Going from the Four to the hardtail I don’t miss the rear suspension, but I do really miss the dropper post! Being able to get the seat out of the way makes it easier to move your weight around the bike for better control over technical terrain. It also makes it easier to get on and off the bike. On the Four I just press a button on the handlebar to change the seat height, or the hardtail I have to physically swap seats/seat posts depending on the sort of riding I’ll be doing. Unfortunately this isn’t something I can upgrade easily.
- Fit – The biggest problem with the hardtail is that the frame isn’t quite long enough. Even with a layback seat post (which is one of the reasons I can’t fit a dropper post), I feel like I’m sitting over the back of the saddle. This won’t be an easy fix, fortunately most of the parts on the bike will transfer over to a new frame.
Realistically I’ll have at least this winter to ride v1.2 of my hardtail, before building v2.0. I will be making sure I take it out on the trails, rather than just using it for more mundane rides, because with the new forks it is such a fun ride!
